STORAGE SYSTEM ANTHRACITE M2000 LM 842

With our storage system you create additional space and utilize the wall space from floor to ceiling! The storage system consists of fixed shelves and pull-out wire baskets and shelves.The pull-out wire baskets, shelves, trouser racks and shoe shelves are attached to the wall rail using a special frame.The roller basket stays on its rails, slides lightly and lasts for a long time.The basket is easy to remove from its rails, for example during cleaning.

With sturdy wall rails, wire shelves and wire baskets, you can easily put together the set you want.You can change the position of the shelves as you like.The storage system consists of three different widths (between the rails):

60 cm wide rail gap, 80 cm wide rail gap ja 60 cm wide rail gap. The width of the rail gap determines the width of the product:
M600 --> for 60 cm wide space
M800 --> for 80 cm wide space

The system contaings the following parts:

• 2 x LM 826 install rail 1050 mm
• 4 x LM 823 holder for assembly list
• 4 x LM 816 wall rail 2 m
• 2 x LM 820 wire shelf M600
• 1 x LM 820 wire shelf M800
• 4 x LM 811 shelf support
• 2 x LM 333 clothes rail 25x650 mm
• 4 x LM 825 clothes rail plug
• 4 x LM 824 clothes rail support
• 2 x LM 642 sliding shelf + frame M600
• 1 x LM 653 sliding trouser shelf + frame M800
• 2 x LM 604 roller slide basket + frame M600 low
• 1 x LM 605 roller slide basket + frame M600 high
• 2 x LM 647 sliding shoe shelf + frame M600

The screws come with the package.

Screws for install rail:

12 pcs 4,5 x 35 dome head + 12 pcs plugs

Screws for wall rails:

24 pcs 4,5 x 50 countersunk screws + 24 pcs plugs

Screws for rear frames:

16 pcs 4,0 x 35 countersunk screws + 16 pcs plugs

Screws for assembly list holders (left and right):

32 pcs 4,0 x 6 machine screws

Screws for rails (left and right):

32 pcs 4,2 x 9,5 Wronic-screws

Installation:

The install rail makes the installation easier. Install rails (LM 826) are installed horizontally at the upper part of the wall at the desired height. Wall rails (LM 816) are hung on the install rail with a separate holder (LM 823). Thanks to the holder, the wall rail can be moved steplessly to the appropriate installation location. The holder is hung to the wall rail. The position of the sturdy holders is easy to change. The wire shelves are mounted using the shelf support (LM 811). Thanks to the mounting strip included in the shelf support, the end of the wire shelf does not have to be directly below the shelf support (image 1).

Image 1. The wire shelf can be installed to go over the holder. In this case, the shelf can be extended, for example, in difficult and cramped spaces, for example under the window or above the radiator.

The clothes rack (LM 333) is threaded into the wall rail support (LM 824) and a clothes rail plug (LM 825) is placeed at the end of the rail to prevent the clothes rail from falling from the holder. 

Material:

The material of the wire shelves is high-quality steel wire and the coating is durable epoxy. The material of the wall rails is impact-resistant powder-coated steel.

Load capacity:

The load-bearing capacity of the wall system varies depending on the material of the load-bearing wall:

• 5 kg in a plasterboard wall / shelf, basket
• 10 kg in a stone wall / shelf, basket,